Best Plumbing Companies in Category: Guide Area

Wood cutting boards are generally made of wood, which is porous and can harbor bacteria. To prevent the board from becoming a breeding ground for bacteria, it needs to be thoroughly cleaned after each use. 123

This article will discuss how to clean your wood cutting board with different methods: dish soap, bleach, vinegar, lemon and salt, oil or mineral oil (to maintain its quality), or replacing it with another cutting board. Keep reading to get the most valuable tips and tricks on how to clean a cutting board with no fuss.

Why Should You Clean The Wood Cutting Board

Wood cutting boards are often made of hardwood like maple, alder, cherry, birch, or walnut. Hardwoods are dense and heavy, so that they can make for a more durable cutting surface than plastic or glass. However, wood cutting boards can also harbor bacteria and need to be thoroughly cleaned after each use.

Wood is porous, which means it absorbs liquids from whatever you cut on it. If the wood isn’t cleaned properly after each use (especially before the next use), it will absorb food scraps and bacteria from raw chicken or meat. This can result in cross-contamination of your other food if you put it back onto your clean board for cutting.

To prevent the board from becoming a breeding ground for bacteria, it needs to be thoroughly cleaned after each use. The most effective way to clean a wood cutting board is with hot soapy water. Hot soapy water penetrates the wood and removes dirt while rinsing away any unwanted food remains or bacteria. This can be cleaned with dish soap, which doesn’t harm the surface of your cutting board.

Cleaning Wood Cutting Boards With Dish Soap

The easiest and most effective way to clean a wood cutting board with hot soapy water. To wash your cutting board with hot soapy water, simply fill it with water, give it a good scrubbing with some dish soap and warm water and then rinse thoroughly after each use.

Cleaning Wood Cutting Boards With Bleach

Bleach is a disinfectant and is used for sanitizing kitchen surfaces. It’s easy to use, widely available, cheap, and effective. To clean your board with bleach, first, fill a bucket with hot soapy water, then add some bleach to it.

Let the wood soak in the solution for 10 minutes, then scrub it with a soft brush or sponge to remove stains, scum or debris. You can also use an old toothbrush to clean out hard-to-reach places on the wood cutting board. Rinse your cutting board thoroughly after each use, especially before reusing again.

Cleaning Wood Cutting Boards With Vinegar

Vinegar is also an all-natural disinfectant, making it an excellent alternative to bleach (and more eco-friendly). To clean your wood cutting board with vinegar, simply fill a bucket or tub with hot soapy water and add ¼ cup of vinegar. Soak the wood in the solution for about 30 minutes, then scrub gently with a high-quality sponge or brush. Rinse thoroughly after each use.

Cleaning A Wood Cutting Board With Lemon And Salt

You can freshen up your board by rubbing it down with lemon and salt, which removes some of the odor and disinfects it too. To clean your board with lemon and salt, simply rub it down with the lemon and salt (for about 10 minutes), let it sit for an hour, and then rinse.

How To Maintain Your Wood Cutting Board

After you’ve used your wood cutting board several times, it can become stained or have scratches on its surface. There are a few ways to care for your wood cutting board so that it looks and performs as good as new:

• Wipe off any debris with a sponge or brush before use; this keeps food from accumulating into hard-to-reach places where bacteria can grow.
• Oil your wood cutting board when it begins to look a little dull, and then store it in a dark place. This will keep its surface from becoming too discolored.
• Use a citrus scouring pad or steel scrubber to maintain the finished look; these are available in many kitchen and hardware stores.
• To maintain your color, simply wipe it down with warm soapy water after each use.

The Bottom Line

To clean a wood cutting board, simply use hot soapy water and a brush or sponge to scrub the surface thoroughly. For particularly stubborn stains or debris, you can use bleach, vinegar or lemon, and salt. The easiest way to clean your board is with the hot soapy water method, but if you want an all-natural cleaning solution, you can use vinegar instead of bleach. I hope this article gave you vast information about how to clean a wood cutting board with ease.

FAQ